Ultimate Works Master Q V2 Lightsaber Released | New Saber Alert
The Pach Store released the Ultimate Works Master Q V2 lightsaber. The custom saber is inspired by the design of the Qui-Gon Jinn lightsaber. The Master Q V2 lightsaber is available as an empty hilt (no electronics) or as an installed neopixel saber. Released in July 2020, the Ultimate Works Master Q V2 lightsaber is a limited run.
The Ultimate Works Master Q V2 lightsaber is comprised of a machined hilt with deep grooves in the grip section. The hilt measures about 29.4 cm long (about 11.57 inches long). The soundboard space is H9.5xL84 and the hilt may accept a 28mm speaker (maximum). The hilt accepts a 1 inch diameter blade (not included with the empty hilt, included with installed saber). A blade plug and hex wrench are included.
The two-toned hilt features a non-removable polished shroud (option of regular polish or mirror polish) offset by a piano-black finish. The metallic red knurled activation switch is situated on the front face of the hilt and a discreet aux switch is situated on the rear. The empty hilt version of Master Q V2 lightsaber does not include a chassis.
The installed Master Q lightsaber is equipped with an Asteria OR Proffie soundboard and configured as a neopixel saber. The wielder may access the Li-Ion battery pack by unscrewing the emitter area and may access the USB port by removing the vented pommel. Due to the deep grooved section and complexity of the hilt, the chassis is fixed inside the hilt and is not removable.